getting message fe80::1 on SX20

[Aman Soi]

Hi,

we are getting message everytime when we restart SX20 as attached . We have not configured any Domain and DNS in SX20 and is working as standalone device.

 when we configure say 1.1.1.1 in Server1 Address under DNS from GUI , we get 1.1.1.1while restart of SX20

output of xstatus is as below

*s Network 1 DNS Server 1 Address: "fe80::1"

the version of SX20 is ce8.2.2 Final 3263c59 2016-09-26

Any suggestions what could be the issue?

regds,

aman

[Patrick Sparkman]

Is the SX20 configured to obtain an IP from DHCP or is it set to use a static IP?
If DHCP, what happens if you try to set a static IP?
Is it configured to use ipv4 or ipv6?
Quick search in the forums, appears fe80::1 might be associated to ipv6.

[Aman Soi]

Hi Patrick,

thanks for reply.

SX20 is using static IP[ipv4].

regds,

aman