Solved: How to change input on Cisco Profile 65 lcd screen

James Evans · ‎01-06-2016

We recently had a Cisco TelePresence Profile 65 system donated. We did not get any documentation and I have been unable to locate instructions for the lcd screen. The screen has several inputs and RS232. I would like to figure out how to change the screen input. Could someone explain how this would be done? I assume its over rs232 because I cant find any buttons on the unit. Is there an API for the screen? What are the communication settings for the screen?

Any help is most appreciated.

Thank you

James

Wayne DeNardi · ‎01-06-2016

Duplicate post - refer to https://supportforums.cisco.com/discussion/12742796/how-change-input-cisco-profile-65-lcd-screen

Wayne

Please remember to mark helpful responses and to set your question as answered if appropriate.

View solution in original post

Wayne DeNardi · ‎01-06-2016

Duplicate post - refer to https://supportforums.cisco.com/discussion/12742796/how-change-input-cisco-profile-65-lcd-screen

Wayne

Please remember to mark helpful responses and to set your question as answered if appropriate.

James Evans · ‎01-07-2016

Thank you for pointing this out and providing a link. I'm not sure how I managed to duplicate the post.