How to configure DX80 MRA in CE9.2?

[Paul Freiberg]

Hi all,

with CE9.2 the edge configuration has changed.

Before I could register it intern, install CAPF, change mode to expressway and fill in the credentials.

Now if I change the mode to edge the device needs to reset and deletes the CAPF Cert.

The admin guide did not helped me.

Our expressway certs are signed by an authority which is in the Preinstalled CAs list. What I have to do?

My workaround is to prepare it with CE9.1 and upgrade it...

Paul

[Paul Freiberg · Accepted solution]

I do not know if I had missed something but with CE9.2.3 I am able to register the DX80 via MRA.

1. Register DX80 on UCM with CAPF

2. Login to Web-Interface

3. Setup –> Configuration –> Provisioning

• 1. LoginName: <UserID>
  2. Mode: Edge
  3. Password: <Password>
  4. Domain: <yourdomain.com>
  5. Protocol: HTTPS
  6. Attention, two Save Buttons!
  7. Test DX80 in external Network