Solved: Is Q.SIG supported on VWIC3-4MFT-T1/E1?

jgouy · ‎11-07-2012

Need to be sure that Q.SIG is supported on the VWIC3-4MFT-T1/E1 card. The datasheet doesn't include this support but I found this very difficult to believe. Thanks!

Jonathan Schulenberg · ‎11-07-2012

I have a customer with a pair of 3925E routers with two VWIC3-4MFT-T1/E1 cards each (the routers are also doing other SIP tasks thus the beefy CPU). Half of those PRIs are configured with Q.SIG pointing toward a Nortel 81c and it works great.

Please remember to rate helpful responses and identify helpful or correct answers.

View solution in original post

Jonathan Schulenberg · ‎11-07-2012

I have a customer with a pair of 3925E routers with two VWIC3-4MFT-T1/E1 cards each (the routers are also doing other SIP tasks thus the beefy CPU). Half of those PRIs are configured with Q.SIG pointing toward a Nortel 81c and it works great.

Please remember to rate helpful responses and identify helpful or correct answers.

jgouy · ‎11-07-2012

Thank you Jonathan.