Is there a command that can open & close a dialpeer on a specified time

[s_thiyagu]

Is there a command that can open & close a dialpeer on a specified time on a router

[Brandon Buffin]

In Callmanager Express and SRST, you can block certain patterns and therefore certain dial peers based on time of day, day of week, and date. See the following links.

Callmanager Express

http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_feature_guide_chapter09186a00802d23e0.html

SRST

http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_configuration_guide_chapter09186a0080392682.html

You can accomplish this with Callmanager by using Time of Day Routing. See the following link.

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a00803edbaa.html

Hope this helps. If so, please rate the post.

Brandon

[s_thiyagu]

Brandon,

First, thank you so much for a quick responds

we dont use Cisco call manager s/w for our Cisco 3745 Router (with VoIP & not a TDM network) c3745-js2-mz.123-6c IOS used as a softswitch, Is there a way we could do this with a existing version to open & close for a specific dialpeer on specific hour, thank you in advance