cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
765
Views
0
Helpful
5
Replies

MCU 4501 H323 Gatekeeper Problem!

Hello  cisco world Ii'm new and i hope that with your help i will soon be able to work with the VCS and the MCU

The problem is

I cannot register the h323 to the VCS

h323 gatekeeper : Enabled

h323 gatekeeper address : the address of the vcs

gatekeeper reg type : mcu standard

mandatory h323 id to register : mcuatprobadotbg

password :empty

and the other fields are empty

in the SIP page everything is OK and it is with status Registered but on the h323 page the results are :

h323 gatekeeper status name resolved to the ip of the vcs

Registered address  not registered

Alternate gatekeeper available  0

Thanks !

2 Accepted Solutions

Accepted Solutions

Hello Svetoslav

What do you see in VCS log ?

Status>Logs>Event log

br Oleksandr

View solution in original post

Ok.

First, you need setup properly NTP on VCS and MCU

br Oleksandr

View solution in original post

5 Replies 5

Hello Svetoslav

What do you see in VCS log ?

Status>Logs>Event log

br Oleksandr

Zdrastvuvai Hello my friend

this is what i get

2013-08-06T17:24:13+03:00tvcs: Event="Registration Rejected" Reason="Time difference too large for authentication" Service="H323" Src-ip="192.168.1.221" Src-port="2222" Dst-alias-type="H323" Dst-alias="mcu@proba.bg" Protocol="UDP" Level="1" UTCTime="2013-08-06 14:24:13,194"

Ok.

First, you need setup properly NTP on VCS and MCU

br Oleksandr

Thanks mate tomorrow i will try and write what happened.

Thanks a lot problem solved! I reconfigured the NTP server and some other stuff and it worked thanks again!