10-24-2013 12:56 PM - edited 03-18-2019 02:01 AM
hello
I was wondering if you could register EX60 directly to the MCU5320
I can't find any documentation on how to properly do it
i"m currently trying to register as SIP unsuccessfully
any help will be greatly appreciated
thanks
Solved! Go to Solution.
10-24-2013 01:05 PM
Unlike the previous MCUs from TANDBERG, none of the newer Cisco MCUs including the 5300 series doesn't have an internal gatekeeper or registrar feature. You'll have to resort to either registering it to some call control server such as CUCM or VCS.
10-24-2013 01:05 PM
Unlike the previous MCUs from TANDBERG, none of the newer Cisco MCUs including the 5300 series doesn't have an internal gatekeeper or registrar feature. You'll have to resort to either registering it to some call control server such as CUCM or VCS.
10-24-2013 01:13 PM
thank you Patrick
That's what i thought but i needed some type of confirmation
I really appreciate the time to take a look into this
Cris
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide