02-14-2018 08:32 AM - edited 03-18-2019 01:52 PM
I'm setting up two CMS servers, both talking to the same CUCM cluster. After reading the CMS documentation, I'm a bit confused about how bext to do this.
Some CMS docs talk about creating Call Bridge Groups and mentioning setting up database replication. Others just seem to talk about setting up all the CMSs in CUCM as you would normally (i.e. SIP Trunks & Route Lists, etc)
Can anyone shine some light in my direction?
Thanks,
Gordon
Solved! Go to Solution.
02-14-2018 04:31 PM
The documentation can be a bit confusing as you need to look at different documents in order to explain all the steps, but basically you will need to setup the following in your deployment in order to facilitate load balancing/HA:
On CMS:
Setup database replication between all servers (you should actually have a third server for this that just runs database, doesn't have to be high spec)
Setup clustering
Setup Callbridge group with both CMS servers in it (not essential, but a good idea)
On CUCM, in order to load balance/HA between CMS:
Setup SIP trunks, Route Groups and Route lists (point to Callbridge CMS servers only - not to the database server)
Setup Ad-Hoc conference bridges and media resource groups/media resource group lists
02-14-2018 04:31 PM
The documentation can be a bit confusing as you need to look at different documents in order to explain all the steps, but basically you will need to setup the following in your deployment in order to facilitate load balancing/HA:
On CMS:
Setup database replication between all servers (you should actually have a third server for this that just runs database, doesn't have to be high spec)
Setup clustering
Setup Callbridge group with both CMS servers in it (not essential, but a good idea)
On CUCM, in order to load balance/HA between CMS:
Setup SIP trunks, Route Groups and Route lists (point to Callbridge CMS servers only - not to the database server)
Setup Ad-Hoc conference bridges and media resource groups/media resource group lists
02-21-2018 12:52 AM
02-21-2018 12:54 AM
02-21-2018 07:09 PM
03-26-2019 06:21 PM
03-26-2019 07:05 PM
When you redeem your license PAKs for SMP, you can enter a MAC address for each CMS server and they will all get licensed.
07-28-2019 07:52 AM
Hi,
My question is regarding Third server. Could you please explain about the third server? would it be CMS?
BR
AbdulKarim
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide