06-27-2018 06:51 AM - edited 03-18-2019 02:12 PM
Hello
I have a sx80 cisco installed and a non-cisco camera in the camera input connected.
In the background the camnara not conected message appears, but if the input source is displayed.
How can I remove the message
Thanks in advance
06-27-2018 09:00 AM
Take a look at this thread on the subject, it gives you some ideas depending on what SW you are using, what inputs you're using, etc. You should be able to find a way around it.
07-17-2018 08:46 PM
I know that under the newer software versions (I checked a CE9.4.0 endpoint), you can get rid of the message by setting the Peripherals > Profile > Cameras setting from the default "Minimum1" to "0".
Please remember to mark helpful responses and to set your question as answered if appropriate.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide