No Name for Supervisor Blade on TMS 13.1

[Anthony Chan]

Have TMS 13.1 running

Upgraded Supervisor Blade 8050 to 2.2 (1.17)

Able to add the Supervisor Blade into TMS

but somehow TMS changed the name from "Fomdo_Sup" to blank

have purged and re-added many times but still get the same result

tried to change name on the Supervisor Blade and did refresh but no change

Below are the log info: (I have replaced certain infos with "xxxx" or "00")

9/17/2011 8:01:39 PM  Serial Number updated from blank to xxxxxxxx

9/17/2011 8:01:39 PM  System name changed from "Fomdo_Sup" to ""

9/17/2011 8:01:38 PM  Connection Status updated to OK

9/17/2011 8:01:28 PM  Connection Status updated to Wrong Password

9/17/2011 8:01:28 PM  System "Fomdo_Sup" Added with IP  Address  xxx.xxx.xxx.xxx, Host Name "", MAC Address "00:00:00:00:00:00" and   Community Name "dmpubc". System is tracked by MAC Address.

Thanks

Anthony

[Patrick Pettit · Accepted solution]

HI Anthony - Can you verify on Supervisor blade itself under Network>DNS there is a hostname listed here?  Name your supervisor here if one is not listed, click update DNS Configuration and force refresh TMS.  Does it show up with a system name in TMS?  Let me know.  Thanks in advance. 

[Anthony Chan]

Hi Patrick

thanks that did the trick

Much appreciated

Anthony