TelePresence and Video Infrastructure

Dear All,Our company currently setup two video conference labs, Cisco and Tandberg. Tandberg lab equipment list,VCS-Control Version X6.0Endpoint: TANDBERG1000 Version E5.2 PALEndpoint: Tandberg MXp95 Version F8.2Cisco lab equipment list;CUCM Version8...

I'm trying to figure out if it is possible to have voice-ports detect if there is a phone connected on a port or not.Right now, i don't have a phone connected on a port and it shows the following:0/1/3  up dorm on-hook idleSince i have a dial-peer co...

I have kept always kept a listing of my CTS endpoints in the End User Directory of CUCM so that it would be accessible via the Directory softkey on the CTS phone. Up until moving to CUCM 8.5, it always appeared alphabetically. Since moving to 8.5, th...

Hi,Please suggest the workaround to achieve the requirement of Video Mail.We have 2 EX-60 and 1 EX-90 which is registered with VCS.What is the configuration steps for VIDEO MAIL, does it require any special licenses or servers. Please throw some ligh...

I recently upgraded one of our C20s to test the new software. When the unit came back up, the resolution was completely off on the unit. I had to go in to the web GUI and toggle resolution off of Auto and back in order for the display to work correct...

Cannot currently create files.  Please verify CME configuration or wait until previous file generation is complete, and then re-issue this command.:oops: Hi All,please help me with this one. I am not able to figure this one out since last 2 days...I ...

I seem to be having some problems on a new install of TMS, VCS Control and Movi clients.There is no active directory to integrate with so I need to authenticate to a local database.I have setup a user there, but when try to register, I am getting a r...

Previously when I click on the edit tab the user ID and password fields was not editable now the user ID and password fields are editable any idea. Provisioning through Active directoryTMS Version 12.6.1VCS version X5.2

Has anyone else experienced an issue where a C20 reboots itself when on a video call with an audio participant as well? The codec is version 4.1. The call was up for a period of time, then just crashed and rebooted itself.

Hi all,Have you noticed that while in a multisite call using an MCU, when someone shares a presentation, the presentation has a large black frame around it when other particpants view it? In other words it is not full screen. In my understanding ther...

Hi all,I have a problem with a CTS1300 system.Since a few days, the screen stopped working. Everything else works fine (i.e lightshroud, microphones, camera's).If I make a call to another unit, the call is established, the audio is good and the other...

Hi all,does someone have a list of SNMP traps generated by Cisco-Tandberg C20, MCU 4500, VCS and TMS.I saw that Cisco TTG products use MIB II (no proprietary mibs), but i couldn´t found a list of posible SNMP traps that those systems can generate.Any...