Hi Pros,
I can understand why our PRIs sometimes send one single call out of more than one channel at time. See the output below:
0x3FF8EA 1A23 0x667E9734 4/0/0:23.8 4/5:1 4502345634 g729r8 999/60171
0x3FF8EE 1A25 0x667E9734 4/0/0:23.10 4/6:1 4502345634 g729r8 999/60171
This is a show voice call status out. We can see the pri sent one single number out of two channel at a time.
2. This is the DP to send the calls out
dial-peer voice 60171 voip
huntstop
destination-pattern 450234563[0-9]$
session target ipv4:x.x.x.x
dtmf-relay cisco-rtp
ip qos dscp cs5 media
no vad
!
When this happend the calls can stay up for hours, I mean none of the router release the ports or the channel even the customer terminates the call. In this canse the call has been up 5 more than 5 HOURS(see output bellow)
ConnectTime=-1918638888 ms
CallDuration=05:04:45 sec
CallState=4
CallOrigin=2
Thanks for your help on this guys,
Crazy
