01-28-2016 01:06 AM - edited 03-18-2019 05:29 AM
Hi,
I would like to know if it will be possible to replace my old Cisco C40 with a Cisco SX80, using TMS's "Replace System Feature'' . I do not care about the configurations that was on the old system, my biggest priority is that the new system will get the old system's TMS ID. If the TMS ID changes I have to reconfigure my IBM Lotus Notes and this is always a painful process. I will be getting the System tomorrow.
Kind Regards
Dirk Stoop
01-28-2016 03:53 AM
Hi,
You can perform this; however need to verify some information I.e. devices are provisioned with cucm or VCS?
What's your tms version?
Thanks,
Vivek
01-28-2016 04:29 AM
Hi,
My devices are provisioned with VCS and my TMS version is 14.2.2
Cheers
01-28-2016 04:36 AM
You'll need to upgrade to TMS 14.4 first, as that is the first version where the SX80 is supported in TMS. If you try to add it to a version that is lower, you might have issues and/or not able to manage the endpoint.
01-28-2016 03:04 PM
Don't forget TMS needs to be 15.x if the SX80 runs CE8.x
/jens
Please rate replies and mark question(s) as "answered" if applicable.
01-31-2016 11:58 PM
Hi Patrick,
Please note I have added my endpoint to TMS without any issues. Thanks for the replies.
Kind Regards
02-01-2016 06:38 AM
Glad to hear you were able to replace the C40 with the SX80. Did you upgrade your TMS, if so, what version? I don't suppose you had any issues there?
Don't forget to mark relevant replies are correct if you issue is resolved to help others that might have the same question.
02-02-2016 12:40 AM
Hi Patrick,
It was not necessary for me to upgrade TMS, currently still on 14.2.2. Thanks for the assistance.
Kind Regards
01-31-2016 11:59 PM
Hi,
I was able to add the endpoint to TMS and replace the existing system without any issues.
Please note I have also not updated my TMS version and is still running on 14.2.2
Regards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide