09-21-2023 06:21 AM - edited 09-21-2023 07:07 AM
Hello,
We have the room bar in each conference room, A touch panel on the table and a room scheduler on the outside of the room. We are wanting to add a wallpaper on the room scheduler. The touch panel and room scheduler are the same device but in different modes.
The room bar connected to the TV has a wallpaper we set and the touchpanel on the table does also. But the room scheduler does not. There isnt a setting to add one. I have spend a lot of time working with Cisco tac with no luck. They sent me here.
Is there a macro that is able to add one to the room scheduler?
Many thanks.
Solved! Go to Solution.
06-12-2024 10:03 PM
You may have already worked this out by now (given your original post is 9 months old), but the newer versions of the RoomOS software allow a separate Scheduler Wallpaper for the scheduler in addition to the standard Wallpaper and Halfwake Wallpaper.
Please remember to mark helpful responses and to set your question as answered if appropriate.
06-12-2024 10:03 PM
You may have already worked this out by now (given your original post is 9 months old), but the newer versions of the RoomOS software allow a separate Scheduler Wallpaper for the scheduler in addition to the standard Wallpaper and Halfwake Wallpaper.
Please remember to mark helpful responses and to set your question as answered if appropriate.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide