I ran into this issue a while back, when our department moved into a new building. Funding was low, most TVs were pre-existing, and that want Cisco VC rolled out everywhere.
When space in particular, had mostly glass surfaces, and a TV mounted on a swing arm Chief mount. Now I could have easily thrown the Quadcamera on the wall below the mount and called it a day, but the angle of the wall we not ideal, and off center. I also new, that users would center the TV to the table or even able towards the whiteboard, which would draw attention away from the camera. So I took a trip to Home Depot.
The solution I came up with, was purchasing 3 black, slotted channel shelving mounts. I tool 2 of them, and bolted them vertically to the chief mount and had them stick out about 7" below the tv. Then I bolted the third slotted channel bar and bolted it to the bottom of the first two, to create a place for me to mount the QuadCamera.
Now I have a brace that can hold my quad camera, and keep it aligned with the display. Images attached. (I am not in the office now, so this is what I had for images, I can get more later if you need detailed shots)
This was about a $20 USD solution, with about 2 hours of labor.
This is the mounted QCThis is an example image of the Slotted Channel Shelving Mounts
These slotted channels, also had enough room to hide the cabling in themes that was an added bonus. :) #cablemanagement
(He, Him, His, Himself)
Video Services Engineer, EU Svcs Communication & Collaboration Services