saving contacts in Ex90 through ssh

[gavin han]

Hi,

I don't have TMS so I'll to save contacts manually into Favorites. how do I save it through ssh?

I used following command but it didn't work:

xCommand Phonebook ContactMethod Add  ContactId:Abc Number:sip:123@abc.com Protocol:SIP

OK

*r PhonebookContactMethodAddResult (status=Error):

Description:  Nonexisting PhoneBookEntry

** end

[Oleksandr Yurchenko]

Hi gavin !

You use the API commands for the C Series.

I do not know whether to apply this API command to EX90.

First you must create a folder to add this folder to the local phoneboock. (its aplicable for C40-60-C90)

xCommand Phonebook Folder Add:

Then create name for this folder and add user...

Many useful things and documentation you can be found at http://developer.tandberg.com

Now I do not have EX90 for test your question.

br. Oleksandr

[Dharmesh Nandoria]

Hi,

try this command ,

xCommand Phonebook Contact Add Name: ABC Number:abc@xyz.com Protocol:sip callrate:768

kind regards,

Dharmmesh

[Garvan Long]

you dont say how many endpoints you have, but if you have 3 or less TMS is free for 3 systems with the trial key.

If you have more than 3 and you have lots of contacts to add then TMS is a must.

I have tried this on an E20 but not on the EX sereis where i created 1 local  entry on an E20 then using SCP found the phonebook file, took an offline copy and created all the contacts i required and then copied it back to the E20.