Hi All,
Just recently ran into an issue when registering video endpoints to CUCM 8.6.2 for the first time. The Endpoints show as registered 5700@servername
i followed the documentation and set the CUCM > Enterprise Parameters (Organization Top Level Domain & Cluster FQDN) to domain.com and reset the CM service.
i can change it on the endpoints to reflect domain.com but then upon reboot the info get pushed back down from CUCM (which makes sense).
Curious if this is how it is or if there is anything else i have to do to push the correct domain down to the endpoints registered to CUCM.
thanks,
TRons