Hi,
what info do you use in order to size the WAN links accordingly? I have some quite old docs that I used, but I think in latest releases bandwidth consumption has been reduced a 20%. How do you size the link to tell the customer the badwidth they need ? Is the info in the administration guide of the endpoint useful for this purpose?
Thi is an example for the MX200:
Thanks,
Ruben
Accepted Solutions
Hi Ruben,
Endpoints bandwidth per resolution may vary, so this information is normally listed in the administrator guide of the systems.
For TC6 and MX-series, here is the new matrix:
Hope this helps, and let me know if you are looking for a similar matrix for other endpoints.
Best regards,
Arne
Hi Ruben,
Endpoints bandwidth per resolution may vary, so this information is normally listed in the administrator guide of the systems.
For TC6 and MX-series, here is the new matrix:
Hope this helps, and let me know if you are looking for a similar matrix for other endpoints.
Best regards,
Arne
