SX 80 with two Precision 60 cameras

[Asowerswhitlock]

We are trying to deploy a SX80 with (2) Precision 60 Cameras. One in the front of the room and 1 in the rear of the room.

The HDMI video is being run through the DM switcher and then into input 1. Since the cameras are not being directly connected to HDMI inputs directly we are having issues with the camera ID.  We can get the front camera to report as ID1 and the rear to report as ID2, but once we reboot the codec it is random as to how they will come back online.

Is there any command or process available to pair them with the codec with a fixed ID so that they won’t change on reboot?

Thanks,

Adam

[rosaho]

This discussion has been reposted from Cisco Employee Leaderboard to the TelePresence community.

[Patrick Sparkman]

Anytime you have more than one camera with the SX80, you might need to input the camera's serial number into the SX80's configuration so the codec will know what camera is what.  See "Cameras Camera [1..7] AssignedSerialNumber" in the SX80 Admin Guide, on pg 69.