11-11-2015 10:48 AM - edited 03-18-2019 05:12 AM
We have an SX20 running 7.3.3 and when the far end sends a presentation we are unable to view it full screen, only in the PIP.
When we present localy and share we have no issues seeing our our presentation full screen.
Has anyone else seen this before? What settings are we missing?
11-11-2015 11:35 AM
One thing to check is your settings on video layout for the remote participants.
Log in on your SX20 web interface.
Configuration > Systemconfiguration > Video > Layout
RemoteLayoutFamily: Auto
For more information, refer to this guide under page 114.
regards,
Acevirgil
11-11-2015 11:58 AM
Thank you for the feedback and will take another look.
Andrew
11-12-2015 03:39 PM
You can press the layout button on your SX20 remote (or the Touch controller) to change the way the presentation is being displayed at the time. It is normal for it to show you the far end camera as well as the presentation in a PiP layout, but you can, doing the above, force the presentation to be full screen.
Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate,
Please remember to mark helpful responses and to set your question as answered if appropriate.
11-13-2015 07:52 AM
Thanks Wayne and yes it should work that way, but currently using they layout button does not work and only shows the far end full screen.
Hope to-do more testing next week.
11-16-2015 06:44 PM
The next questions then would be around how the screens are configured on the endpoint.
Some quick things to check would be things like:
Are you able to post a copy of the xconfiguration of the endpoint?
Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.
Please remember to mark helpful responses and to set your question as answered if appropriate.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide