TelePresence and Video Infrastructure

Hi, We've received several 8941 phones using firmware 9.3(4) SIP, but I've previously configured on CUCM using firmware SCCP. We've other 8941 working before with SCCP, so I dont want to leave some 8941 with SCCP and others with SIP. This 8941 SIP do...

We have an SX20 running 7.3.3 and when the far end sends a presentation we are unable to view it full screen, only in the PIP. When we present localy and share we have no issues seeing our our presentation full screen. Has anyone else seen this befo...

Hello, My secenarioCUCM 10.5VCS 8.6 SX20--------->CUCM ----SIP Trunl----->VCS-C------travelsal zone---->VCSE(with NAT)------>internetI have problem with no answer call on SX20 witch is register to CUCM.The connection from internet ALIAS meet.xxx@tree...

Hello Experts!                    I have query that is Cisco TelePresence Conductor can deploy with TMS 15.0.1 ? , I have seen the document Cisco TelePresence Conductor with Cisco TMS 14.6 .. Any help will be apreciated KV

Hi We want to install one Sx20 and 3 Sx10. According to Data Sheet Sx20 supports :- ●  Four-way embedded SIP/H.323 conferencing capability with MultiSite option ●  Ad-hoc conferencing supported through: ◦   Unified Communications Manager Media Resour...

Hi All How can you tell if a C60 is a Gen 1 or Gen 2 without looking at the physical device. Many thanks Luke

Hi I have some Edge 75 MXP devices and I need to upgrade device software to F9 version Devices are not covered under an active warranty or contract. I would appreciate for any ideas BR, Alexander

Hey guys! I've got an SG-300 52 port switch I'm using for Video over IP (just add power). It's part of a job that was started over 2 years ago and was put on hold. Unfortunately, all I know is that the switch, 9 transmitters, and 14 receivers were on...

Hi Everyone, I'm confusing about the use of VCS and BE6K integration. Could we still make video calls/conferencing (internal and external) with BE6K only? For example, if I have SX10 and SX20 registered to CUCM, both devices can make video calls to e...

Hi All We have a Cisco VC Expressway border controller in our DMZ, We want to look at setting up inbound calls from the internet to our VC's on the inside, they all have SIP names on them on the inside. what needs to be done to enable this? also do w...

Hi Does someone have used "Maximum authorizations per period" when using Expressway on  MRA ? What it does ? I am trying to mitigate blocked accounts when trying multiples login from  jabber client but is not working.. -Alex

Cisco MCU has a nice web interface for monitoring the health of endpoints in the conference, however a migration to the latest Telepresence Server software with Conductor is pending.   We need to prepare our Video Support Team for connecting and moni...