08-23-2016 07:35 AM - edited 03-18-2019 06:18 AM
Hello,
I have a doubt, if i have one sx20 registered to CUCM 11.5 if i need to call an external video or CMR is possible without the Expressay (C and E)
Regards
Leonardo Santana
Solved! Go to Solution.
08-23-2016 09:25 AM
All calls will be routed via CUCM.
CUCM is SIP only, so when registering endpoints to it, H323 will be disabled on the endpoint.
08-23-2016 08:38 AM
Expressway-C/E is free with CUCM, and WebEx calls doesn't consume any licenses since X8.6.1 when they introduced license bypass for calls to WebEx CMRs. So, there is no reason to not deploy Expressway-C/E to allow you to make outbound calls to WebEx.
08-23-2016 09:00 AM
Hello Patrick,
I will check that, but is possible without Expressay?
Regards
Leonardo Santana
08-23-2016 09:10 AM
Unfortunately I don't have the answer to CUCM making SIP outbound calls without Expressway, as I'm just getting into CUCM myself.
08-23-2016 09:13 AM
Patrick,
If i register the SX20 with CUCM all call requisitions will be sent to CUCM?
I think i not explain right my doubt.
If i make a sip call will be sent to cucm, and if i make an h323 call to an external IP will be sent to cucm too?
Regards
Leonardo Santana
08-23-2016 09:25 AM
All calls will be routed via CUCM.
CUCM is SIP only, so when registering endpoints to it, H323 will be disabled on the endpoint.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide