Hi
I try to reset the IP password via Remote control and get always the complaint that the password needs to be at least 8 characters and number. I tried any combinaiton of 8 chars and 1 number, 8 chars and 2 numbers, 6 chars and 2 numbers, 4 chars a...
My custom layout is missing when I have more than 1 additional attendee.
I have downgraded to TC7.3 since CE8.1.1 will not support custom layouts.
The custom layout is available when I only have 1 attendee and myself but if another caller is added it...
We have 2 SX10 devices. Each in 2 different cities.
From city A to City B calls reach but when it is answered no video or audio and call is automatically placed on hold.
From city B to City A call dont go out.
Both VC's are on natted IP's and w...
Hi dears, My customer has a C40 and it is on a old version 4.2.0.260857. I have tried to upgrade to version 6.3.2 but I got the error below during the install process. " /mnt/base/image2/postinstall.d/rwfs.hook filed to run!" I've tried more than tw...
We recently installed a new SX80 which is behind the firewall and we have all ports from source (x.x.x.x) to destination (VCS-C) opened. SIP registration works fine so SIP calling. however, H.323 registration is rejected, we see on the firewall log s...
Hi All,
I've just been testing out the 'Call My Video System' from our WebEx CMR Cloud site (great feature), and noticed that it is dropping the initial + when the call hits our call control. Has anyone come across this before?
E.g. Address entered...
My setup is as follows - 2 SX20's registered to CUCM and an SX80 also registered to CUCM. I am using Conductor and vTS for conferencing.
My issue is that I have created custom layouts for the SX80 using TC Console. When I place a one to one call fro...
My client has a MSE 8000 + 8050 + 8510x3.
When over 50 user join the conference, the video has mosaics on it. And after reboot the 8510 card, it seems solved that problem.
I checked the
Cisco TelePresence MCU MSE 8510 Data Sheet
http://www.cisco.co...
Has anyone got any recommendations for a wireless mic system for the whiteboard?
IX5000 is installed and whiteboard mounted and setup ok. Just looking for a wireless mic system that can be wall mounted above the whiteboard.
Cheers
Ritchie
Hello guys.I have an issue with integration SX20 TC 7.1 with CUCM 9.0CUCM registration rejected.Provisioning CUCM checked.There is error in application_log of SX20:Sep 17 21:35:30.411 a8 appl[1583]: 7219.85 PROV I: [requestItem] Requesting http://XXX...
Hello Everybody.
We Have here Stand Alone SX20, and i configured it based on this discussion https://supportforums.cisco.com/discussion/11606926/sx20-standalone, I Tried with firewall no work, then i connected it directly with isp router and open the...
I know it's new, but has anyone had any luck getting the new multistream functionality on the Telepresence Server working? I'm pretty sure I have all the prerequisites and configurations in place, but it's not working. Thanks, Mike
