Tacacs+ on VG200

[d-tay]

Hi,

i have a vg200 in 12.2(19) IOS. I try to enable tacacs+ authentication but it does not work.

Is there any sample configuration to turn on tacacs+ authentication for vg200.

[bwilmoth]

The below configuration is sufficient

aaa new-model

aaa authentication login default group tacacs+ local

aaa authentication login no_tacacs enable

aaa accounting exec default start-stop group tacacs+

aaa accounting network default start-stop group tacacs+

It is the same as configuring in other routers. Have a look at this link also

http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121newft/121t/121t3/dt_aaara.htm

[d-tay]

Hi,

thanks for yr feedback. There is one command i cannot find in vg200. Tacaca-server host .

without this command, tacacs+ cannot be used.

Do u knw whether vg200 can run tacacs+ ?

i appreciate yr feedback very much