05-16-2013 01:27 AM - edited 03-18-2019 01:07 AM
Hi,
Can anybody advise that what will be the limitation if we use PVDM3 on ISRG2 router as a multipoint device instead of standalone MCU for Telepresence.
Also we prefer to use CUCM v9.x for the purpose of VCS.
Hardwares will be used:
1. CUCMBE v9.x
2. PVDM3-256 (qty: 2) on ISRG2 2951
3. CTS-MX300-55-K9 (qty: 4)
4. CTS-EX90-K9 (qty: 4)
5. Cisco 99971 Phones.
Any valuable advice would be highly appreciated
BR, Shimjid.
Solved! Go to Solution.
05-16-2013 03:37 AM
The PVDM3s have a few limitations compared to a true MCU:
Use the DSP calculator to figure out the sizing:
http://www.cisco.com/web/applicat/dsprecal/dsp_calc.html
Additional details:
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/gatecont/ps4952/qa_c67-649850.html
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/gatecont/ps4952/data_sheet_c78-649427.html
Please remember to rate helpful responses and identify helpful or correct answers.
05-21-2013 11:53 AM
No it is not. There is no layout or floor control.
Please remember to rate helpful responses and identify helpful or correct answers.
05-16-2013 03:37 AM
The PVDM3s have a few limitations compared to a true MCU:
Use the DSP calculator to figure out the sizing:
http://www.cisco.com/web/applicat/dsprecal/dsp_calc.html
Additional details:
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/gatecont/ps4952/qa_c67-649850.html
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/gatecont/ps4952/data_sheet_c78-649427.html
Please remember to rate helpful responses and identify helpful or correct answers.
05-17-2013 12:00 PM
Thank you very much Jonathan for the valuable info. What about Continuous Presence View (To display multiple participants in a veriety layouts) ? Is it possible with PVDM3 ?
05-21-2013 11:53 AM
No it is not. There is no layout or floor control.
Please remember to rate helpful responses and identify helpful or correct answers.
05-22-2013 01:23 AM
Thank you Jonathan for the great support...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide