12-16-2003 01:23 AM - edited 03-17-2019 08:08 PM
hi
when i call from phone1 to phone2,after 10 seconds i can hear ringback tone below situation.
i could not understand why so late ?
anyone help me ?
phone1 - pbx -(T1 with E&M)- 3661 - IP network - 1750 - FXS - phone2
12-17-2003 04:17 AM
You may be using the 'T' as a destination pattern in your dial peers and this will wait 10 seconds as an interdigit timeout until it makes the call. Make your destination patterns more specific (eg 5... etc) so the router will make the call as soon as it sees the defined number of digits.
12-17-2003 07:33 AM
thank for your reply.
there was no the 'T' as a destination pattern.
i figured it out today. and i think that your reply is almost right. because the PBX hold a call like your anwser. after changed the parameter of PBX, it was solved.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide