08-07-2011 11:37 PM - edited 03-17-2019 10:25 PM
Hi,
I have VCS Control ,VCS Expressway and CUCM 8.0 in the lab.
Please let me know how to integrate CUCM 8.0 with VCS Control and Expressway.
Any Document or supporting URL would be helpful.
Thanks in advance.
regards,
Manish Gupta
08-08-2011 12:23 AM
Hi Manish,
document as bellow
CUCM integration with VCS
VCS and VCS expressway integration
HTH
if helpful Rate
08-13-2011 04:38 AM
is your integration went well ? let me know if you need any more help
08-15-2011 10:17 AM
Hi Marwanshawi,
Sure and Thanks for the help!
Haven't tried yet ,will surely update once done.
regards,
Manish
01-27-2012 08:35 PM
Hi
I am just trying the integration with not success, I am getting this issues:
Do you have any idea? I will apprecited.
01-29-2012 07:00 AM
Hi Manish,
I see below in the search:
which says "Reason: Service Unavailable"...so my question is whether the trunk to CUCM is showing active on VCS?
01-29-2012 08:51 AM
I would look in CUCM to see if the trunk is defined properly and the handling of the incoming message is defined properly.
01-29-2012 09:31 AM
I am also getting this error when testint "locate":
Failed to start locate: Out of resource |
any idea?
Thanks
01-29-2012 09:44 AM
it would appear you're trying to do a LOCATE of SIP alias that is not found in the DEFAULT ZONE and you have not specified a domain name in the alias.
01-29-2012 09:08 AM
Yes, is showing as active:
SIP Voice Trunk Zone | Neighbor | 0 | 0 kbps | Active |
01-30-2012 03:37 AM
Failed to start locate: Out of resource
will come when you try to locate a E.164 number or any alias without a domain and you select the protocol as SIP under locate.
since the trunk is showing active i think its good if you capture the netlog 2 or diagnostic log when you try to create the issue. and check whether the INVITE is sent to CUCM or not.
Also i think you would like to open the case with Cisco TAC for this issue.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide