TelePresence and Video Infrastructure

Hello all,One of my clients asked me about the CAD drawing of the floor of a CTS-3210.I found some forms to visio but not CAD drawings of the equipment.Can these pictures be downloaded from any website?

Dear all,Anyone knows the detail of the CTS-3010 option,as we see there are three options in the autocollaborate.1.CTS-HFR-COLLAB-3K Cisco TeleP High Frame Rate Auto Collab for CTS-3000/32002.CTS-HFRCOLLAB1K-CH CTS 1100 HFR Codec for china3.CTS-HFRCO...

Hi Everyone,we need a cisco telepresence system that can accomodate about 60 participants.Can cts-3010 achieve this? which CTS can accommodate this?brsam

When we add a new conference on MSE8510(Ver4.2), an error message below was outputted.(The conference was added on the MSE8510)Moreover the added conference wasn't registered with VCS Control, so we couldn't connect the conference even though we dial...

Hi,Could you please advice if F8.2 PAL and F8.1 PAL MXP versions are compatile with Cisco VCS v.X7.0.3 and Cisco TMS v.13.1.2With Best Wishes and Regards,Nikolay

Hi all,Problem StatementExternal Movi calling internal EX90 or CUCM extensions, No audio/video at allSetupVCS Express is placed at the DMZ zone with public IP address that is NOT NAT-edVCS  Express X7.0.2 (0 Non Traversal Calls, 5 Traversal Calls, 50...

Cisco 2800 Router | I am having problem, calls are dropping frequently. ISP Side is fully tested, problem in router. calls are even dropping between localextensions---Posted by WebUser Amjad Ali

hi,can i change the routed mode in cisco VCS ?Can i set only H.225-routed mode or H.245-routed mode ?ThanksFCostalunga

HiSo if i understand the documentation correctly, Jabber telepresence now allows tunneling over 80/443 if it cant get out on the normal ports? If I have understood correctly, can someone explain or show an example of what I need to set on the SRV?I f...

Hello, I was wondering if it is possible in CUCME 7.1 to make the caller ID on regular outbound calls be one number, but if you forward your phone to have that caller ID be a different number. For example:Company A has DIDs 555-444-1100-1120Caller A ...

Hello Everyone,I want to know whether 3600 series routers supports call manager latest version 8 or not. I want to use skinny protocol. I want to know if it supports,  do I need to purchase any additional licenses and other important things. This is ...

Recently upgraded our VCS Starter Pack to 7.03. No issues with the upgrade but once complete Jabber / Movi clients can no longer register. Endpoints such as the EX90's have no trouble. I have not been able to find a root cause.Has anyone seen this af...

Hi,I received this warning message for VCS Control. (The directory servise database is not running :state – new : action -).What does it mean?I do not see other problems. What affects for this error. Can I manually start the service?ThanksBr. Oleksan...