WEBEX & H323 in SX20 Possible?

[harray1982]

Hello everyone, 

Please guide me how to use Webex Teams, Webex Meetings & H323 facility from Cisco SX20 device.

Thanks 

Harold Raymond

[Wayne DeNardi]

If you register your SX20 to the Webex Cloud, then it will register as a SIP endpoint, and all your calls will go via the cloud, and H.323 will be disabled (the same as if you register the endpoint to a CUCM).

[WeiKwongOng5555]

Hi Wayne,
Is there any prerequisite to register Cisco SX series product to the Webex Cloud?
Can we add Cisco SX series product to a user in the control hub, and host Webex meeting?

Thank you.

[Hythim Ali El Hadad]

Hi Wayne

Can I register the room kit for both webex on cloud and stand alone

Not at the same time. But to move between them

As If we ordered the room kit with webex registration to register on cloud

Can I reconfigure it as standalone to call internal H323 standalone devices

Then to register it on webex again to call  skype or other units and vice versa

The availability to register the room kit on cloud then as  H323 then on cloud and so on

Thanks

[Wayne DeNardi]

No, you cannot register to both Webex and use it Standalone, and switching between the two would not be easy (as you'd need to remove it from Webex, then add it back again each time you wanted to do so).

Your better option would be to register all your other devices to an on-prem call control platform that can be SIP dialed from externally (including Webex), or, a better option if you don't have a suitable call control platform, would be to register all your endpoints to the Webex cloud (assuming they are modern enough).