Solved: What to do with a couple of old TTC8-01 codec cameras?

Douglas Baggett · ‎06-22-2018

So can a couple of old Tandberg TTC8-01 be used for anything? They have HDMI outputs on it and power supplies are not a problem.

Just seems like such a colossal waste to toss/excess them given the optics are probably just as good as the newer CISCO codec cameras.

PJMack · ‎06-22-2018

They are only 720p, not 4K like the newer ones, so they are not nearly the equal of new ones. You also can't control them without a serial connection (the later 12x cameras could be controlled independent of the codec with a Tandberg remote).

IMHO they are throwaway at this point unless you have a specific use case for them. You could try selling them but I doubt you'll find any buyers for a 12+ year old camera.

View solution in original post

PJMack · ‎06-22-2018

They are only 720p, not 4K like the newer ones, so they are not nearly the equal of new ones. You also can't control them without a serial connection (the later 12x cameras could be controlled independent of the codec with a Tandberg remote).

IMHO they are throwaway at this point unless you have a specific use case for them. You could try selling them but I doubt you'll find any buyers for a 12+ year old camera.

Douglas Baggett · ‎06-27-2018

Yea, that's what I thought. It's just a shame because the lens and optics on them are still nice.
thanks