Windows 7 x64 VT camera II drivers

[pmeadows1]

Does anyone know where I can get the Windows 7 x64 drivers for the VT camera II? If not, where can I get the Vista x64 drivers? Thank you.

[Jerry Ye]

The driver doesn't support any 64-bit OS.

HTH,

jerry

[pmeadows1]

So you are telling me that there is no way that this device will work on a 64 bit OS at all?

[FullTimeWebHosting]

yep, does'n work.

other way it's

at boot time, disable the signature drivers requiered.

then, install the driver using the Compatibility Mode with Windows XP SP2 or SP3, then you could install the driver.

hope that's fix your problem.

greeting.s

[Ivan Golovin]

There is cuva-Admin-fmr.2-3-1.zip available for download on Software Downloads at cisco.com, posted 29-Nov-2012. It says that the file would contain a driver for VT Camera II. Somebody had chance to try this on Windows 7 x64? My current CCO-privileges don't allow download this software.

Cisco Unified Video Advantage 2.3(1)- Includes 2 installers: application and Cisco VT Camera II driver

cuva-Admin-fmr.2-3-1.zip

http://software.cisco.com/download/release.html?mdfid=278781226&softwareid=282074313&release=2.3(1)&relind=AVAILABLE&rellifecycle=&reltype=latest

[Phillip Remaker]

All official drivers are 32 bit only.  There are no official 64 bit drivers for the CUVA cameras.

[Ivan Golovin]

Ok, I see. Anyway, the trick with Logitech drivers worked fine for me. I used qc1051enu_x64.exe in my specific case.

[Phillip Remaker]

Really!  That's great news.  For the longest time, the Cisco PID/VID of the OEMed logitech device was not included in the standard Logitech Drivers, despite the fact that the hardware is close to identical, otherwise.

It would seem that the 11.1 supported it, 11.8 did not.  Which version package did you download?

I would be interested to know if the VT Camera I is also supported by the most recent release of the drivers of it's logitech cousin.

The VT Camera 2 is a variant of the Quickcam Pro 5000. (Dark grey)

The VT Camera 1 (or just VT Camera) is a variant of the Quickcam Pro 4000. (Light Grey)

[Ivan Golovin]

Please, note the definition "trick" in my previous message

Indeed, I had to edit the .inf-file and change 08CE to 08C7 or something like that (see the exact procedure in the messages below). After that the drivers installed without any problems.

I downloaded and succesfully installed qc1051enu_x64.exe which is version 10.5 I guess? Before that I tried qc1190_x64.exe but it wouldn't install even after the inf-file was hacked.

My camera is VT II, the dark grey one. So it detects as Quickcam Pro 5000 after installation.

[nelcnetworks]

There is an unsupported workaround for this.

I have tried it and it works but it doesn't let the video advantage work with anything except an IP Communicator. The solution is as follows

1)  Download the latest driver from Logitech's website for Vista x64 for the QCP 5000.

2)  From a non-Windows 7 PC (or from XP Mode), run the installer.  Let it extract all of the files, and DO NOT PROCEED through the installation process (or if it errors, keep the error message open).  Go to the Temp folder where the files were extracted (in my case, in XP Mode, it was C:\Documents and Settings\{username}\Local Settings\Temp\QuickCam_11.1.0)  COPY (don't Move) this folder to a location that's accessible to your Windows 7 system.

3a)  For Cisco VT users, go into the \QuickCam_11.1.0\Drivers\x64\PRO464 folder and edit the lPRO464v.ini file.  Do a find-and-replace, finding 08C5 and replacing it with 08C7 (this essentially makes the ini file identify your Cisco VT device ID as a QCP 5000).  Save and close the ini file.

3b)  Go into Devices and Printers.  Go into the properties for the USB Composite Device, find the Unknown Composite Device, and update the driver.  Select to manually specify the driver location.  Point it to the \QuickCam_11.1.0\Drivers\x64\PRO464 folder, and you should be all set.

Hope it helps

[chriscarson]

Thanks!

Hacking the Vista x64 for the QCP 5000 driver works.

[matt]

Sweet relief!  Thanks!

I had tried to do this a while back, with no success.  Kudos to you.

[matt]

Additional note.

I had to download ftp://ftp.logitech.com/pub/techsupport/quickcam/qc1051enu_x64.exe, which is an older version of the drivers, and complete the same steps in the PRO364 folder (as opposed to PRO464).

[soknetworkops]

Do you know of a way to get XP Pro x64 to recognise the VT Camera II ?

[Phillip Remaker]

Although not supported, you can probably force-install the Logitech Quickcam 5000 XP 64-bit drivers using a variation of the instructions posted above, either by hacking the INF file or using the advanced install process to install unsupported drivers.

There are no official Windows XP 64 bit drivers for the Cisco VT Camera II.