I have a CUCM setup with Cisco Unified Meeting Place with software bridge for voice and video. I want to bring in Video endpoints registered to VCS but want to use the meeting place as the conference bridge(Multipoint switch)
Please advise if this is possible and also advise on the best design for the VCS and Call Manger environment.
I dont think this is possible with software bridge, you will need atleast MCU for video conferencing. if you want invoke conference from CUCM endpoints then register MCU with CUCM as conference bridge . If you want to invoke from VCS then you need MCU register to VCS.
Cisco Unified Meeting Place is already acting as a video Bridge for the SX20 units registered on the Call Manager. To allow for SIP compatility calls from the Internet, introducing the VCS expressway will be the solution.
If these calls are forwarded to the Meeting Place, shoukd it not be possible to join an already active video conference on meeting Place?
QuestionHi Team,I just need to confirm if we change NTP servers on UCCX, will it affect the license on UCCX 12.0 ?Do we need to re-host after updating NTP?Already done on CUCM and CUC , and it didn't affect but not sure for CCX. Thank you ...
Hi I need urgent help on once issue. I need to configure Multicast on my layer 2 and layer 3 switches for Voice Paging server. Singlewire paging server connected with core and end IP phone on layer 2 switches. I need to configure Multicast on layer 2 and ...
Community Live- CUCM Bulk Administration Tool: Practical Things You Can Use Every Day
(Live event - formerly known as Webcast- Tuesday January 14, 2020 at 10 am Pacific/ 1 pm Eastern / 7 pm Paris)
This event had place on Tuesday 14th, January 2020 ...
A warning in ESXi 6.5 appears: "The configured guest OS (CentOS 4/5 or later (64-bit)) for this virtual machine does not match the guest that is currently running (CentOS 7 (64-bit)). You should specify the correct guest OS to allow for guest-sp...
To participate in this event, please use the button to ask your questions
This topic is a chance to clarify your questions about Cisco Unified Communications Manager (Unified CM) Bulk Administratio...