cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
256
Views
2
Helpful
1
Replies

ı hae cisco unity to cucm problem

ozden ozdugun
Level 1
Level 1

Our system cisco 12.5 unity and call manager

I have 2 call handler

the main number of the customer and a operator number 

whne we call the outside the main number there is no problem the unity wellcome voice is ok but coulnd't trasnfer to central hunt group number on the cucm 

 

1 Accepted Solution

Accepted Solutions

The System Configuration Guide for CUC is not particularly clear on the CSSes that must be configured for functionality. 

The Inbound CSS is for calls that CUC makes, like Notifications and MWI (for SCCP intergrations)1.jpg

The Rerouting CSS and Out-Of-Dialog Refer CSSes are used for calls that flow into CUC from CUCM but then flow back to CUCM.2.jpg

Make sure all three are configured, and reset your trunk. Let us know how it goes.

Maren

View solution in original post

1 Reply 1

The System Configuration Guide for CUC is not particularly clear on the CSSes that must be configured for functionality. 

The Inbound CSS is for calls that CUC makes, like Notifications and MWI (for SCCP intergrations)1.jpg

The Rerouting CSS and Out-Of-Dialog Refer CSSes are used for calls that flow into CUC from CUCM but then flow back to CUCM.2.jpg

Make sure all three are configured, and reset your trunk. Let us know how it goes.

Maren