I have problem dtmf .
my system
TELCO - sıp - CUCM - Third party ivr
when ı call the ivr and press the ivr button.the first button is working but couldn'!t work second and the other button and when we log the ivr the first button repeat 10 times
our system cucm 8.6 -- sıp trunk -----cisco voice gateway ----- sip trunk ------telco we can call outside but,when we want to forward all to mobile phone.call forwarding couldn't work
my system is cucm 8.6.2 -s,ip to cisco 3925 router to sip to telcoI couln't call iphone to outside but ı can ringing outside to iphone but couldn't call ı added configuration and ccsip inout debug at the attached
Hi.our system is - Cisco Voice gateway - CUCM - Voice Recorder -FXO - cisco 3925 - cucm 8.6.2 -Voice recorder When we call outside to ip phone .ı couldn't see the caller id on the router and voice recorder.fxo - router -sip to voice recorder How c...
our system ı have ıvr third party cube and cucm
telco--cube-cucm-ivr
all of the system sip
cube conf
dial-peer voice 1 voipdescription CUCM to CUBEsession protocol sipv2incoming called-number .Tvoice-class codec 1voice-class sip bind control source-...
yes I use prefix.and calling party selection is orginatior.this configuration my calling is working but forwarding not working.when change the calling party selection redirect number.calling and faorwarding not working and ı saw debug voip ccapi ino...
our telco only access for the calling number to outbound the customer number for exp 08501230000 to 9999this our customer number.we want to send calling number only did for exp 9999 or 2345 4 digit or another number for example 0530xxxxxxx telco bloc...