acceptable range of Memory utilization for the VM of UCS Server?

[ccg-collab1]

Hi All,

Is there a document that indicates the acceptable range of the the vsphere of UCS Server? Example my vsphere has a total of 32GB of Memory, and then I installed UCCX 11.5 with 16GB of Memory, CUCM with 6GB of Memory, and CUC with 4GB of Memory. With this I will have a total of around 26GB used Memory. Since Maximum application for the Be6k is 4 application, do you think that it is still ok if we add additional application even though the used Memory is already 26GB?

Thank you.

[Jitender Bhandari]

Hi

So as long as the application memory requirement and co-residency policy is satisfies we don't care.

https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/uc_system/virtualization/virtualization-cisco-unified-communications-manager.html

https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/uc_system/virtualization/collaboration-virtualization-sizing.html

Not sure if this is what you were looking for.

(Rate if it helps)

JB

[Jaime Valencia]

There should be more than enough room if you install the OVA's that are supported in a 6K, your UCCX is NOT supported on the 6K.

https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/uc_system/virtualization/virtualization-cisco-unified-contact-center-express.html

So, make that -2 vCPU, -6 vRAM and - 146 GB in storage.

That's more than enough for other app, using the supported OVA.

[Deepak Rawat]

You can only install 100 agent OVA template on BE6K that requires 2vCPU, 10GB Ram and 1x146 GB HDD. What you are trying to install there is 400 agents OVA template that requires 16GB which is not supported on a BE6K

Regards

Deepak