An extension on the agent phone is shared with one or more other devices.

[bobsloan]

Try to configure a 7940 phone with CAD. When I try to log in as the agent I get this message "

"An extension on the agent phone is shared with one or more other devices. This configruation is not supported." I am not sure why I am getting this I have configured the phone the same as I have the others. Matched with 3 others phones that work perfect. Can anyone help to what is going wrong with this config?

Bob

[yahsiel2004]

The agent number can't be a shared number, that setup is not supported. Try moving the shared number down on the agents phone to line 3 or lower. If this is UCCX 8.0.2 than you will need to upgrade to 8.5.

Regards,

Yosh

[Firasat.siddiqui_2]

i have CUCM 9.1.2 and UCCX 9.0.2, my agent required to work from home sometime during the week so they need ip communicator when working from home and physical phone when they are in the office.

any workaround for this? instead of agent should use IP Communicator in both cased

[Carlo Poggiarelli]

Hi.

Yes you can configure Extension Mobility for those users so they can use any available IP Phone logon with cad.

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a0080153e60.html#wp1037543

HTH

Regards

Carlo