cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1828
Views
5
Helpful
3
Replies

Call Transfer Delay

Chris Pohlad-Thomas
Cisco Employee
Cisco Employee

So we just hired a receptionist and moved our office manager (who had been performing double-duty) into a new office. Her extension was 101, which worked fine. I created a new DN (100) for the receptionist and added it to the hunt group for our operator line. For some reason, whenever anyone tries to transfer a call to her, the option to hit the transfer button does not come up immediately. It does eventually come up and then you can transfer the call. Am I missing something here?           

1 Accepted Solution

Accepted Solutions

Chris Smalley
Contributor
Contributor

I'd check your Route Plan Report to see if you have another DN that begins with "100". It's possible that the system is still looking for "100x", but when you had DN "101" there were no other possible matches.

View solution in original post

3 Replies 3

Chris Smalley
Contributor
Contributor

I'd check your Route Plan Report to see if you have another DN that begins with "100". It's possible that the system is still looking for "100x", but when you had DN "101" there were no other possible matches.