Change Authcode sequence in CUCM

[saurabh_om]

Hello,

I need to match a customer experience with CUCM. Anybody wants to access PSTN should dial a code *12 followed by authcode and then PSTN number. 

I CUCM auth code always asked after matcing the route pattern.  Is there any way to chnage this sequence in CUCM??

Regards

Saurabh

[Manish Gogna · Accepted solution]

Hi Saurabh,

Within CUCM there is no such option to have a FAC or CMC to be input before dialing the called party number.

HTH

Manish