cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3361
Views
0
Helpful
3
Replies

Cisco 12G SAS Modular Raid Controller

darin.marais
Level 4
Level 4

Dears,

I have seen the following document on the Cisco website;

http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/hw/C220M4/install/C220M4/raid.html

Is there a "101" document anywhere that describes best practice first time configuration for "Cisco 12G SAS Modular BIOS Configuration Utility 5.10" for use with ESXi 6.0u2 and CUCM 11.5?

1 Accepted Solution

Accepted Solutions

Jonathan Schulenberg
Hall of Fame
Hall of Fame

Here you are:

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/virtual/CUCM_BK_CF3D71B4_00_cucm_virtual_servers/CUCM_BK_CF3D71B4_00_cucm_virtual_servers_chapter_01.html

View solution in original post

3 Replies 3

Jonathan Schulenberg
Hall of Fame
Hall of Fame

Here you are:

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/virtual/CUCM_BK_CF3D71B4_00_cucm_virtual_servers/CUCM_BK_CF3D71B4_00_cucm_virtual_servers_chapter_01.html

Thank you very much Jonathan, that is exactly the document that I have been after :-)

hi Jonathan,

After selecting CTRL-R and then F2 for Operations on the controller, I am unable to Select "Create Virtual Drive" It seams to be greyed out. Is that because the virtual drive has already been created?

Also for the C220-M4S,

1. Is it preferable to create 1 VD and add all 8 physical drives to that in the raid?

2. For best practice, which drive should be selected as the boot drive or does it matter?

regards

Darin