Cisco CUBE registrar server

[MrMartin]

Hi!

I have a question regarding CUBE and SIP registrar.

What is the function for the command "registrar server" that can be configured under voice service voip?

My PBX is trying to send register (with a username CUBE) to my CUBE, but gets a 404 reply back. See debug message below.

Is it possible for the PBX to register at CUBE?

The SIP-UA configuration should that be used when register a SIP trunk to a ITSP for example?

REGISTER sip:192.168.10.1:5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.10.20:5060;rport;branch=z9hG4bKPjce2d51c5-6589-45aa-8331-3cbc5ac7e26c
From: <sip:CUBE@192.168.10.1>;tag=9d7ae2a8-f827-4365-9114-cd08f900a20b
To: <sip:CUBE@192.168.10.1>
Call-ID: d7b06bb5-d024-4760-aed5-20136a4c11bf
CSeq: 522 REGISTER
Contact: <sip:s@192.168.10.20:5060;line=pwrwzfn>
Expires: 3600
Allow: OPTIONS, INVITE, ACK, BYE, CANCEL, UPDATE, PRACK, REGISTER, SUBSCRIBE, NOTIFY, PUBLISH, MESSAGE, REFER
Max-Forwards: 70
User-Agent: FPBX-16.0.17(18.10.0)
Content-Length: 0

*Apr 8 10:51:39.826: voice_reg_get_reg_expires_timer: no voice register pool found
*Apr 8 10:51:39.826: //-1/xxxxxxxxxxxx/SIP/Error/ccsip_reg_search_call_id_table:
No entry found in sipCallID Table
*Apr 8 10:51:39.826: //-1/xxxxxxxxxxxx/SIP/Error/sipSPI_validate_own_ip_addr:
ReqLine IP addr does not match with host IP addr
*Apr 8 10:51:39.826: //-1/xxxxxxxxxxxx/SIP/Error/check_supported_header_for_matching_tag:
Unable to access supported header values
*Apr 8 10:51:39.826: //-1/xxxxxxxxxxxx/SIP/Error/check_supported_header_for_matching_tag:
Unable to access supported header values
*Apr 8 10:51:39.826: VOICE_REG_POOL: Register request for (CUBE) from (192.168.10.20)
*Apr 8 10:51:39.826: VOICE_REG_POOL: Invalid destination pattern (CUBE)
*Apr 8 10:51:39.827: //5123/B436F70492C4/SIP/Error/ccsip_spi_register_incoming_registration:
No matching pool for this REGISTER contact - CUBE@192.168.10.20
*Apr 8 10:51:39.827: //-1/xxxxxxxxxxxx/SIP/Error/sipSPI_ipip_PassthruContentContainerFreeHelper:
Null ContentQ - Exit
*Apr 8 10:51:39.827: //-1/xxxxxxxxxxxx/SIP/Error/ccsip_rpcb_search_cc_call_id_table:
No entry found in ccCallID Table
*Apr 8 10:51:39.827: //5123/B436F70492C4/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 404 Not Found
Via: SIP/2.0/UDP 192.168.10.20:5060;rport;branch=z9hG4bKPjce2d51c5-6589-45aa-8331-3cbc5ac7e26c
From: <sip:CUBE@192.168.10.1>;tag=9d7ae2a8-f827-4365-9114-cd08f900a20b
To: <sip:CUBE@192.168.10.1>;tag=F4EACF4-12B5
Date: Fri, 08 Apr 2022 10:51:39 GMT
Call-ID: d7b06bb5-d024-4760-aed5-20136a4c11bf
Server: Cisco-SIPGateway/IOS-17.3.4a
CSeq: 522 REGISTER
Content-Length: 0

Thanks in advance!

[Shalid Kurunnan Chalil]

Hi there, 

1. What is the function for the command "registrar server" that can be configured under voice service voip?
    It enables the CUCME to allow the SIP endpoints to register with the SIP Server (CUCME)- for detailed information check RFC 3375
2. My PBX is trying to send register (with a username CUBE) to my CUBE, but gets a 404 reply back. See debug message below.
   What is your PBX system?
3. Is it possible for the PBX to register at CUBE?
   Not possible to register with the CUBE.
4. The SIP-UA configuration should that be used when register a SIP trunk to a ITSP for example?
   Correct, just a quick reference below
   sip-ua
   credentials username XXXXXXX password xxxxxxxx realm itsp.com
   authentication username XXXXXXX password xxxxxxxx realm itsp.com
   registrar dns:itspsip.domain.com expires 3600
   sip-server dns: itspsip.domain.com

Regards,

[MrMartin]

Thanks!

2. Im running two Freepbx (Asterisk) and two CUBE as session border controller between. So i don't have a ISP to register with.

Topology

192.168.10.20(FreePBX #1) --> (LAN) CUBE#1 (WAN)-->(WAN) CUBE #2 (LAN)--> 10.12.0.20 (FreePBX #2)

Best regards Martin

[Shalid Kurunnan Chalil · Accepted solution]

Hi, 

I don't have any idea how it will be configured in FreePBX (Asterisk). But I can tell that you cannot use CUBE as a registrar server. You probably check in the FreePBX forum. 

Found the following thread from a google search - click here may help you further. If you still want to verify any configuration in the CUBE, please do share here to look further. 

regards,