Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi there!Im trying to figure out how to use sip-profiles in CUBE to modify a SIP invite header. So for example when i call sip:12345@someip i would like the CUBE to modify it to alphanumeric SIP:martin@someip and route that out to a specific dial-pee...
Hi!I have a question regarding matching inbound dial-peer on CUBE.I've read some example on the link below and wounder if it's possible to have wildcard in the "user-id" part, for example 123..* or how would i type this?And also if i only match "cis...
Hi! I have a question regarding CUBE and SIP registrar.What is the function for the command "registrar server" that can be configured under voice service voip?My PBX is trying to send register (with a username CUBE) to my CUBE, but gets a 404 reply b...
Hey!I am learning Cisco CUBE and various functions before we install in our production environment.I have managed to setup two PBX, two CUBE and two IP phone. And i can seup calls between the phones with matching on called-number and destionation-pat...
Hey!I am learning Cisco CUBE and various functions before we install in our production environment.I have managed to setup two PBX, two CUBE and two IP phone. And i can seup calls between the phones with matching on called-number and destionation-pat...
Hi!Just an additional question. Is this a possible solution to match IP 10.10.0.(0-255) in the SIP URI ?Voice URI class: TESTSNMP status = ActiveSchema = sipuser-id =host = 10.10.0(.*)phone context =dial-peer voice 100 voipdescription inbound LANses...
Thanks! 2. Im running two Freepbx (Asterisk) and two CUBE as session border controller between. So i don't have a ISP to register with. Topology 192.168.10.20(FreePBX #1) --> (LAN) CUBE#1 (WAN)-->(WAN) CUBE #2 (LAN)--> 10.12.0.20 (FreePBX #2) Best re...