cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2677
Views
5
Helpful
4
Replies

Cisco MRA call flow

Shan28
Level 1
Level 1

Hi Guys,

Please help me to understand MRA call/media flow between 2 end points using different expressway cluster register using mra..
Refer docs if any.. 

2 Accepted Solutions

Accepted Solutions

Since  you  are calling  using  PSTN, the call flow will be as mentioned below.

 

 

PhoneA>>EXPR-E>>EXPR-C>>GATEWYA>>PSTN>>GATEWAYB>>EXPR-C>>EXPR-E>>PhoneB

 

Read the below document.

 

https://www.ciscolive.com/c/dam/r/ciscolive/us/docs/2019/pdf/BRKCOL-2000.pdf

 

 



Response Signature


View solution in original post

Jonas Fraga
Spotlight
Spotlight

Hello Shan28.

The default Media call flow without ICE implemented are as follows:

 

Client A <-> Exp-E_1 <-> Exp-C_1 <-> Exp-C_2 <-> Exp-E_2 <-> Client B

With ICE are just Client A <-> Client B

 

But Signaling following always this:

Client A <-> Exp-E_1 <-> Exp-C_1 <-> CUCM <-> Exp-C_2 <-> Exp-E_2 <-> Client B

 

View solution in original post

4 Replies 4

How do you dial each other ?

 

 



Response Signature


Hi Nitin, 

 

Consider both are in different cluster(2 different customers) having reachability only through pstn number.. 

 

---

Shan

Since  you  are calling  using  PSTN, the call flow will be as mentioned below.

 

 

PhoneA>>EXPR-E>>EXPR-C>>GATEWYA>>PSTN>>GATEWAYB>>EXPR-C>>EXPR-E>>PhoneB

 

Read the below document.

 

https://www.ciscolive.com/c/dam/r/ciscolive/us/docs/2019/pdf/BRKCOL-2000.pdf

 

 



Response Signature


Jonas Fraga
Spotlight
Spotlight

Hello Shan28.

The default Media call flow without ICE implemented are as follows:

 

Client A <-> Exp-E_1 <-> Exp-C_1 <-> Exp-C_2 <-> Exp-E_2 <-> Client B

With ICE are just Client A <-> Client B

 

But Signaling following always this:

Client A <-> Exp-E_1 <-> Exp-C_1 <-> CUCM <-> Exp-C_2 <-> Exp-E_2 <-> Client B