Cisco MVA - Bulk Configuration

[gaurish.nayak@velocis.co.in]

Can we configure Cisco MVA in Bulk?

We want to configure all the parameter device profiles, remote destination profiles, etc. can we do this all in Bulk administrator for 150 users. How can we achieve this?

[b.winter]

As there are bulk operations available for those objects, you should be able to do this.

[Maren Mahoney]

Do you mean Mobile Voice Access (being able to dial in from the outside and place an outbound enterprise call anchored on your enterprise phone)? Or do you mean Single Number Reach (aka Mobile Connect) where when someone rings your internal extension, it also rings an external device like a cell phone?

The reason I ask is that MVA is a feature configured in CUCM and on a gateway, but for individual users is only a checkbox, while SNR is something that can be configured via BAT for multiple users.

CUCM 12.5 Feature Guide: Chapter: Cisco Unified Mobility contains instructions on manually configuring SNR profiles and also enabling/configuring MVA.

For bulk configuration of SNR, go to the Bulk Administration Guide for Cisco Unified Communications Manager, Release 12.5(1)  and look at the chapter "Mobility"

Maren

[Nithin Eluvathingal]

You can  insert Remote destination and remote destinations profiles from Bulk. Refer the Guide @Maren Mahoney shared.

2.12.0.0