cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
787
Views
0
Helpful
3
Replies

converting a 4 digit dial plan to 10 digits

DavidPeter
Level 1
Level 1

I have been asked to convert a 4 digit dial plan to 10 digits. It was kind of my idea but now I am not sure what the best path would be as I need to do this one site at a time at least to start. I know what to do for the Unity Connections side but on the CUCM side I would like to have them be able to dial the 4 digits without a prepending site code and vice versa dial 10 digits from the other locations without a site code. Is that possible and what would the best means to do this be?

Thanks for any help!

Dave

1 Accepted Solution

Accepted Solutions

Jaime Valencia
Cisco Employee
Cisco Employee

Configure the translation patterns to do that.

HTH

java

if this helps, please rate

View solution in original post

3 Replies 3

Jaime Valencia
Cisco Employee
Cisco Employee

Configure the translation patterns to do that.

HTH

java

if this helps, please rate

OK I think I understand. I could have a translation pattern of 85872023XX that is in the partition the 10 digit phones are in and set the CSS for one that has the partition the 4 digit phones are in and set the "calling Party transformation mask" to XXXX to match the 4 digits they are dialing?

I tried and tested what I had below and it worked both directions.  Sometimes just a few words can get you on the right track :) Thank you