CUAC 10.5.1 Physical to VM migration

[vijit kumawat]

Has anyone used Vmware P2V converter ?

I planning to migrate CUAC 10.5.1 from a physical box to a VM, wanted to confirm if there are any risk in using vmware P2V converter to migrate CUAC.

Please let me know if it is safe.

Thanks in advance

[Manish Gogna]

Hi Vijit,

As per the following link

http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/uc_system/virtualization/virtualization-software-requirements.html#converter

VMware vCenter Converter

P2V tools are not supported. To migrate from bare-metal servers (e.g. Cisco 7800 Series Media Convergence Server) to UC on UCS, the supported procedure is:

• upgrade to 8.x software version on the bare-metal server
• take a software backup
• fresh install 8.x software on VMware / UC on UCS
• restore from backup

Manish

- Do rate helpful posts -

[Joe Price]

Attendant Console you would be fine.  You will have to rehost the license.  I've done this before.  Its not technically supported but its not a big deal and you can always go back to using the physical if something does happen.