cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1029
Views
0
Helpful
6
Replies

CUCM 12.5 OVA Deployment

mumbles202
Level 5
Level 5

If you're deploying a small site w/ roughly 500 users on non-UCS hardware should you use the 2500 user OVA or the 1K user?  I know the 1K user is labeled for C200 only but not sure if that was legacy and still applied (I've been told there isn't an issue but on the other hand reading up it seems the C200 is specialized for a particular CPU).

6 Replies 6

Jaime Valencia
Cisco Employee
Cisco Employee
This video will give an overview of Cisco's new Prime Collaboration Deployment application. Then it will walk through how to deploy and configure it. PCD Admin guide - http://bit.ly/PCD10-0Admin 5/13/2014 UPDATE: ATTN Cisco Partners if you want to use this lab and have a Cisco CCO account go to ...

Thanks. I'm familiar with the link and just read it a bit more closely. So based on that it seems like the 1K selection is supported as long as its supported hardware. Is there a reason the notes on the 1K selection still say c200 only?

mumbles202
Level 5
Level 5

It's been some time and had a quick follow up.  Installing a subscriber on a 2nd vCenter and the servers there have Intel(R) Xeon(R) CPU E5-2697 v4 processors.  I believe the C-200 ova can be deployed on the server but want to confirm if I should expect pushback from TAC in the event they ever need to be called.

As last time you asked the information is in the link Java posted.



Response Signature


mumbles202
Level 5
Level 5

The way I read that document as long as you meet the hardware requirements you're ok based on this line"Any model with physical core speed 2.00 GHz to 2.49 GHz (base frequency not turbo)." for restricted UC?

This would be the same way as I would interpret the information given. The information given in the OVA would also be of interest for this.



Response Signature