CUCM 6/7 SIP Trunk utilization via SNMP

vnebolsi · ‎05-24-2010

Hello All,

I would like to monitor the number of "CallsInProgress" for any given SIP Trunk on my CUCM using SNMP. The RTMT makes this information available under performance->Cisco SIP->CallsInProgress, but I am having no luck finding the correct OID for the SIP Trunk utilization.

What I found is the details of SIP trunks:

"ccmSIPDeviceInfo" "1.3.6.1.4.1.9.9.156.1.14"

"ccmSIPTableEntries" "1.3.6.1.4.1.9.9.156.1.5.33"

"ccmSIPDeviceTable" "1.3.6.1.4.1.9.9.156.1.14.1"

"ccmSIPDeviceEntry" "1.3.6.1.4.1.9.9.156.1.14.1.1"

"ccmSIPDevIndex" "1.3.6.1.4.1.9.9.156.1.14.1.1.1"

"ccmSIPDevName" "1.3.6.1.4.1.9.9.156.1.14.1.1.2"

"ccmSIPDevProductTypeIndex" "1.3.6.1.4.1.9.9.156.1.14.1.1.3"

"ccmSIPDevDescription" "1.3.6.1.4.1.9.9.156.1.14.1.1.4"

"ccmSIPDevInetAddressType" "1.3.6.1.4.1.9.9.156.1.14.1.1.5"

"ccmSIPDevInetAddress" "1.3.6.1.4.1.9.9.156.1.14.1.1.6"

"ccmSIPInTransportProtocolType" "1.3.6.1.4.1.9.9.156.1.14.1.1.7"

"ccmSIPInPortNumber" "1.3.6.1.4.1.9.9.156.1.14.1.1.8"

"ccmSIPOutTransportProtocolType" "1.3.6.1.4.1.9.9.156.1.14.1.1.9"

"ccmSIPOutPortNumber" "1.3.6.1.4.1.9.9.156.1.14.1.1.10"

"ccmSIPDevInetAddressIPv4" "1.3.6.1.4.1.9.9.156.1.14.1.1.11"

"ccmSIPDevInetAddressIPv6" "1.3.6.1.4.1.9.9.156.1.14.1.1.12"

"ccmSIPDeviceInfoGroup" "1.3.6.1.4.1.9.9.156.3.2.23"

"ccmSIPDeviceInfoGroupRev1" "1.3.6.1.4.1.9.9.156.3.2.31"

However there are no any counters for calls made available.

I know RTMT and Ops Manager can do it and I suspect it's not a straight forward. Any ideas?

Thanks,

Vlad.

Marcel Ammann · ‎03-09-2011

Hello Vlad,

this post is a little bit older - but you could now monitor the utilization of the SIP Trunk with the new Operations Manager 8.5.

Kind regards,

Marcel Ammann

P.S.: Please rate helpful posts

Marcel Ammann · ‎03-09-2011

Hello Vlad,

in the attachment is a screenshot of the feature.

Kind regards,

Marcel Ammann