cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1050
Views
0
Helpful
4
Replies

CUCM 8.6.2a Slowness when Subscriber down

Nicolas MICHEL
Level 1
Level 1

Hey there.

I have just extended my CUCM cluster with 3 other subscribers.

If my WAN line at the remote site is down, the publisher GUI is starting to be very slow ... I guess the pub is looking for his child but I wonder is this behavior is expected or documented.

I have checked in the SRND and found nothing regarding this...

Does someone know about it ?

Thanks guys !

Nicolas

2 Accepted Solutions

Accepted Solutions

Jonathan Schulenberg
Hall of Fame
Hall of Fame

I ran into this as well at one point. TAC had to root into the box and change a shell script to stop retrying to reconnect the nodes indefinitely. There's a defect for this but I can't find it in the toolkit at the moment. Call TAC on this one.

Please remember to rate helpful responses and identify helpful or correct answers.

View solution in original post

CSCtq30130

Symptom:


Database access connections slow to time out


Conditions:


"A Cisco DB" stopped or network/dns problems or misconfiguration


Workaround:


Correct the configuration/network issues and make sure "A Cisco DB" is running

Had to upgrade to 8.6.2a.SU3

View solution in original post

4 Replies 4

Nicolas MICHEL
Level 1
Level 1

Anyone ?

Jonathan Schulenberg
Hall of Fame
Hall of Fame

I ran into this as well at one point. TAC had to root into the box and change a shell script to stop retrying to reconnect the nodes indefinitely. There's a defect for this but I can't find it in the toolkit at the moment. Call TAC on this one.

Please remember to rate helpful responses and identify helpful or correct answers.

Thanks Jonathan !

I ll call the TAC (who said once again ? ) in order to Tshoot this

Nicolas

CSCtq30130

Symptom:


Database access connections slow to time out


Conditions:


"A Cisco DB" stopped or network/dns problems or misconfiguration


Workaround:


Correct the configuration/network issues and make sure "A Cisco DB" is running

Had to upgrade to 8.6.2a.SU3