10-23-2014 12:19 AM - edited 03-19-2019 08:46 AM
Hi,
We are planning to CUCM 8.6 Unrestricted move to CUCM 8.6 Restricted to CUCM 10.5 restricted.
Question is can I use the PCD tool only to export the configuration of CUCM 8.6 Unres so that I can import configuration to CUCM 8.6 Restricted.
Then upgrade the CUCM 8.6 RES to CUCM 10.5 RES.
Other wise I have that to use BAT tool.
Best Regards,
Piet
10-23-2014 12:56 AM
Hi Piet.
Unfortunately you cannot migrate from Unrestricted to Restricted version directly or through DRS.
All you could do is to export CUCM configuration through BAT (as much as you can) and re-import on newly installed CUCM with restricted version.
HTH
Regards
Carlo
10-23-2014 01:08 AM
Dear Carlo,
Thanks for your Email.
Best Regards,
Piet
10-23-2014 01:17 AM
Hi Piet,
[+5] to Carlo.
In addition to what Carlo has said, u also need to look into format while import/export because of different CUCM versions.
regds,
aman
10-23-2014 01:23 AM
Dear Aman,
Do you mean from CUCM 8.6 Unrestricted to CUCM 8.6 Restricted?
I know that BAT File 10.5 has a lot of difference regarding naming and other options.
Best Regards,
Piet.
10-23-2014 01:24 AM
No.
I was referring from 8.6 to 10.x
regds,
aman
10-23-2014 01:29 AM
Dear Aman,
Thanks
Best Regards,
Piet
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide