08-04-2014 07:17 AM - edited 03-19-2019 08:27 AM
hi,
I've deployed a CUCM 9.1.2SU1 and a VCS Control / Expressway x.8.
The Szenario is the following:
EX60/90 (TC6.3.2) --> SIP --> CUCM --> SIP TLS --> VCSc --> Assent --> VCSe --> H.323/SIP/SIP TLS --> The World :-)
I initiate a Video call via the EX60 to a remote endpoint behind the VCSe. The Call connects. everything looks good. After 15 minutes the cucm disconnects the call.
The VCSc sends an INVITE Message to the CUCM. The CUCM sends an INVITE Message to the EX60. The EX60 answers with 200 OK. Then the CUCM sends BYE to VCS and to EX60
In the BYE message I found the Reason Q.850:cause=47
does anyone have an idea what could be? I haven't :-(
thx for ur help
Nico
08-04-2014 03:34 PM
I would try to update the EX60/90's firmware. I remember seeing an issue with the similar behavior although I am unable to find the bug ID.
08-04-2014 11:35 PM
I don't think it's the firmware. I have also tested with SX20 and 7.1.4 :(
09-12-2014 03:27 PM
Did you resolve this issue? I am seeing similar issue on 9.1.2 but with secure Jabber for Windows Client
01-05-2015 11:11 PM
issue fixed. It's a bug in cucm 9.x. --> CSCud38314
The Bug is fixed in CUCM 10.x
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide